P0753 Shift solenoid valve "A" electrical fault

P0753 – OBD-II Trouble Code Technical Description

Trouble code P0753 indicates that the PCM has detected an electrical fault in the shift solenoid valve A.

What does the fault code mean P0753?

Trouble code P0753 indicates an electrical problem in the shift solenoid valve “A”. This valve controls the movement of fluid in the hydraulic circuits of the automatic transmission and regulates the gear ratio. If the actual gear ratio does not match the required gear ratio, the P0753 code will appear and the Check Engine light will come on. Error codes may also appear along with this code. P0750, P0751, P0752 и P0754.

Possible reasons

Some possible reasons for the P0753 trouble code:

• Problems with the electrical circuit associated with the shift solenoid valve “A”.
• Damaged or corroded wiring, connections or connectors leading to the solenoid valve.
• The solenoid valve “A” itself is faulty.
• Problems with the automatic transmission control module (PCM), which may incorrectly interpret signals from valve “A”.

These are just general reasons, and specific reasons may vary depending on the specific make and model of car.

What are the symptoms of a fault code? P0753?

Some possible symptoms for trouble code P0753:

• Shifting Problems: The vehicle may have difficulty shifting gears or may not shift into certain gears at all.
• Erratic or unusual transmission behavior: The transmission may be unstable or exhibit strange behavior when shifting gears.
• Increased fuel consumption: Due to improper functioning of the transmission or constant shifting of gears, the vehicle may consume more fuel.
• Check Engine Light Illuminated: Trouble code P0753 activates the Check Engine light on the dashboard.

These symptoms may occur to varying degrees depending on the specific problem with the shift system.

How to diagnose a fault code P0753?

The following steps are recommended to diagnose DTC P0753:

1. Checking the transmission fluid: Make sure the transmission fluid level and condition are within the manufacturer's recommendations. Low fluid levels or contamination can cause the transmission to malfunction.
2. Reading error codes: Use a diagnostic scanner to read error codes from the engine management system. In addition to the P0753 code, check for other related error codes that may indicate additional problems.
3. Checking electrical connections: Check the electrical connections and wiring associated with shift solenoid valve “A”. Make sure the connections are secure and there is no corrosion or broken wires.
4. Resistance test: Measure the resistance of solenoid valve “A” and compare it with the manufacturer's recommendations. Abnormal resistance may indicate a valve failure.
5. Checking the valve for blocking: Check to see if solenoid valve “A” is stuck in the off position. This can be done using a tester by applying control voltage to the valve and checking its functionality.
6. Checking mechanical components: Sometimes transmission problems can be caused by mechanical problems such as worn or damaged parts. Check the condition of the mechanical components of the transmission.
7. Re-check after repair: If problems are found and resolved, re-read the error codes and test to ensure the problem is resolved.

Diagnostic errors

When diagnosing DTC P0753, the following errors may occur:

• Incomplete diagnosis: Some technicians may only scan for error codes and may not fully diagnose the shift system, which may result in other problems being missed.
• Faulty sensors: If the problem is with the sensors that control the pressure control solenoid valve, insufficiently accurate results may lead to incorrect conclusions.
• Ignoring other problems: Trouble P0753 may be related not only to the pressure control valve itself, but also to other components of the transmission or the vehicle's electrical system. Ignoring or misinterpreting other symptoms may lead to misdiagnosis.
• Incorrect component replacement: If the P0753 problem is caused by a faulty pressure control valve, but other components are replaced, it may result in unnecessary repair costs without addressing the underlying problem.
• No additional check: Some technicians may neglect to check additional factors such as electrical connections, wiring conditions, or system pressure settings, which may result in additional problems being missed.

To effectively diagnose the P0753 trouble code, it is recommended that you have a qualified technician perform a complete inspection of the shift system and related components to determine the correct cause of the problem.

How serious is the fault code? P0753?

Trouble code P0753 indicates a problem with the automatic transmission pressure control solenoid valve. This valve is responsible for regulating the pressure in the transmission hydraulic system, which affects gear shifting.

The severity of the P0753 code can vary depending on your specific situation:

• Potential transmission problems: If a problem with the pressure control valve is ignored, it can result in irregular or rough shifting, which can increase wear on the transmission and other components.
• Security and controllability: Incorrect gear shifting can also adversely affect the vehicle's safety and handling, especially when driving at speed or on unpredictable road conditions.
• Possibility of damage to other components: A faulty pressure control valve can affect the operation of other components in the transmission hydraulic system, which can ultimately lead to additional damage.
• Repair cost: Repairing or replacing a pressure control solenoid valve can be costly, especially if the problem occurs suddenly and requires rapid replacement of the component.

Overall, the P0753 trouble code should be taken seriously and steps taken to diagnose and correct the problem as soon as possible to avoid further damage and ensure the safety and normal operation of the vehicle.

What repair will help eliminate the code? P0753?

Troubleshooting the P0753 code includes a number of possible actions depending on the cause of the problem. Below are the basic steps and repair measures:

1. Checking electrical connections: The first step should be to check the electrical connections, including the connectors and wires associated with the pressure control solenoid valve. If necessary, contacts are cleaned and corrosion is removed.
2. Replacing the pressure control solenoid valve: If diagnostics confirm a malfunction of the valve itself, it should be replaced. Typically this component can be replaced individually without having to replace the entire transmission.
3. Checking and replacing sensors: If necessary, it may also be necessary to check and replace the sensors that control the operation of the pressure control solenoid valve.
4. Software update: In some cases, the problem can be solved by updating the software (firmware) of the automatic transmission control module (PCM).
5. Additional repairs: If other problems are found, for example with the electrical system or the gearbox itself, appropriate repair work must be carried out.

It is important to note that in order to successfully resolve the P0753 code, it is necessary to conduct a thorough diagnosis and determine the source of the problem. It is recommended that you contact a qualified technician or service center for repair work.

P0073 Ambient Air Temperature Sensor Circuit High 🟢 Trouble Code Solved 🟢 Symptoms Causes Solutions

P0753 – Brand-specific information

Trouble code P0753 refers to problems with the transmission pressure control solenoid valve. Below is a list of some cars with their descriptions:

• Toyota/Lexus – Pressure control solenoid valve 1-2 (Shift Solenoid A Electrical)
• Ford – Pressure control solenoid valve “A” (Shift Solenoid “A” Electrical)
• Honda / Acura – Pressure control solenoid valve 1 (Shift Solenoid Valve A Electrical)
• Chevrolet/GMC – Pressure control solenoid valve 1 (Shift Solenoid “A” Electrical)
• Nissan/Infiniti – Pressure control solenoid valve 1 (Shift Solenoid “A” Electrical)

Each manufacturer may call these components differently, but they usually refer to the same component, the transmission pressure control solenoid valve.